Carve out two pieces of plywood with the exact dimensions of the hole. Shape the spot on both sides of the door to a rectangle or square, preferably of specific dimensions Similar to the previous approach, this method works for hollow wooden doors. Sand the edges of the patch to ensure a smooth finish. Using a solid wood adhesive, stick the wood as a patch over the door on both sides – inside and out Ensure the wood shape is larger than the size of the hole. Do this again to get two identical shapes and sizes of wood. Get a piece of plywood and carve out a suitable shape of your choice. Scrap out any loose plywood on the edges of the hole using the utility knife Sand, the patched area, when dry to achieve a smooth surface.įor wood doors, this might work, depending on the design of the door and the patch. Remove the C-clamp when the filler dries and apply joint drywall compound all over the repair. Cover the repair using c-clamps until the filler dries out. Use the wood filler to fill the hole, slightly concave the patch. If you’ve got a solid core wood door, it usually won’t get damaged, but if that happens, then there is a remedy. You could also opt to paint the entire door. Finally, paint the patched surface with the same color paint as the rest of the door. Apply some sparkle over the smooth patch surfaceĦ. Sand the filler and any leftover expanding foam or filler stuck to the plywood door material around the edges with 100-grit sandpaper.ĥ. Smear the mix to be sure to cover all the holes, and allow it to harden (that shouldn’t take too long)Ĥ. Apply a mixture of auto-body filler and a hardener catalyst. To cover up any remaining air spaces in the hole, apply expanding foam insulation and allow it to dryĤ. Scrap out any loose plywood on the edges of the hole using the utility knifeģ. This method works for hollow doors, and here’s what to do:ġ. More often than not, you can get a hole in your door, by accident or by someone purposely punching it.Įither way, you’d need to repair it correctly.īelow are ten ways you can cover up a hole in your door. Doors can be durable, but you can’t deny that they aren’t invulnerable.
0 Comments
Leave a Reply. |